Diesel Generators
      Back to home
      1. Support Portal
      2. Diesel Generators

      Commodore Diesel Generator Fuel Gauge Replacement

      1. The fuel gauge is located on the top of the generator under a plastic cover with a rubber edge.

      2. Using your screw driver, gently lift one side so you can get your fingers underneath the edge.

      3. Gentle remove the cover and place to the side.

      4. Using the screw driver, gently pry one side of the fuel gauge so you can pick it up and lift it out.

      5. Place the new gauge in its place being careful to make sure it is the right way around, then place the cover back and press it down until it is firmly secure in its original position.